Category : Uncategorized

If a new wash program is recommended use the guide below to determine a suitable wash program.  If the wash program is automated ensure that the selected wash program (in the guide below) is available. Use water quality & then hot water availability to select the most suitable wash program(s).  The numbers refer to the wash ..

Read more

Produce a list of specific action(s) that are required to rectify the situation and  mitigate the risk of the issue recurring. Allocate the action to the person (this may not be the person who undertakes the action) who will take responsibility for the action to be completed. Set an agreed date for the action to be ..

Read more

During the wash cycle count the number of slugs entering the receiver. The aim is to have 12-15 well-formed slugs entering the receiver during the wash cycle, at a speed of between 7 and 10 m/s Slug speed can be estimated by following this method: 1. Determine the time, in seconds, from when the air ..

Read more

Ensure PPE is worn. A chemical test kit is required to assess whether the chemical characteristics comply with the requirements for effective cleaning. The test should be conducted on cleaning solutions that have been made up but not used. The tests to conduct are given in the Table below. Chemical test parameters for cleaning solutions ..

Read more

Bulk Milk Tank wash program assessment Almost all new bulk milk tanks sold since the mid-1990s have automatic cleaning systems. The degree of flexibility to adjust the wash program varies enormously between brands and between models within a brand. Often the wash programs are coded (similar to that on automatic ..

Read more

Include any additional tests, observations and/or findings that may have been made. This may include any observations/assessments of the skills of the operators, wash routine deployed, or other factors that may contribute to the understanding(s) for the current hygie..

Read more

Estimated cleaning solutions flow rate through clusters At least 10% of the clusters should be tested. A minimum of 3 tests are required to complete the assessment. A visual inspection should be undertaken first to identify any clusters that may have uncharacteristic flow patterns. If there are any correct ..

Read more

This is a list of Hygiene Investigations that are either in progress or have been completed. Since each investigation can contain plenty of data it is important to sync after changes have been made to any investigations. Creating a new investigation There are 16 steps to a full investigation.  Each step targets a particular element ..

Read more

How to Create a New Farm Make sure you have internet connection before you go out to a farm. You will need to insert the farm details and those of 5 different contacts, scrolling right down to the bottom of the screen to include the region/sub region allocated by Dairy ..

Read more

This is the “home screen” for the selected farm. It shows the main farm contacts. Further farm details can be accessed (and edited) by selecting the “View Farm Details” button. The status of invited users to the farm is also shown.  Their status shows as ..

Read more