The Bulk Milk Tank Wash Routine has 9 default steps which can be added to, rearranged or deleted. To add another step, type the step instructions in the field marked ‘Add Another Step’ then click the ‘+‘ which will add this new step to the end of the list. To rearrange the order of any ..
The Hygiene Tracker is intended to be an ongoing source of results data that should be updated regularly to provide the best trending information. It is good practice to be consistent when entering manual data in the Hygiene Tracker. The daily results / threshold / date information are all required, then select ‘Update’ to record ..
The CIP Wash Routine has can be created either by selecting the ‘Default’ routine which has 31 steps that is broken up into four sections – After milking, Pre-rinse, Wash and Final rinse – or a ‘Blank’ routine which still has the four sections, but allows you to build your own steps in the routine ..
The Wash Program Wall Chart has 3 cycles to use, however if you wish to add another cycle, click the ‘+ Add Cycle’ button at the bottom right of screen. Once you have completed the details for the Wash Program Wall Chart, convert the chart to a PDF by selecting the ‘Share’ button on the ..
Cooling Performance Recommendations Making recommendations Create a list of specific action(s) that are required to rectify the situation where poor performance has been identified. A list of result-dependent pre-composed actions is automatically created. Each action can be edited to reflect specific conditions or deleted. New actions can be added by entering text in ..
Review Cooling Performance Results from the analyses of measurents taken are summarised in the tables. The values in the “Expected” column are expected results for the type of equipment selected. The values serve as a guide only. The values in the “Actual” column are the results based on the measurements taken. The “Comment” ..
Check Cooling Performance Create a name for this routine for future reference. For example, “April 2018 routine check”. Pre-cooling information – plate coolers Select the type of plate cooler. The list contains four of the most common types of plate coolers ..
Cooling Performance Listing This is where you’ll find the list of cooling performance assessments pertaining to the selected Farm. The list comprises those assessments that have been completed and those that are in progress. Select “Sync” to update the records on the server. Any reports to scheduled for sending to recipients will be ..
This is where progress on the allocated actions can be monitored. If the “close” button is selected the investigation will be finalised and no further editing of this investigation will be..
If a new wash program is recommended and the wash program is automated ensure that the new wash program is availab..